Learn How to Fix Jura Impressa E8, E9, E50, E55, E70, E75, E80, and E85.
Thermoblock, Water Tank, O-Rings, PTFE Tubes, Hoses, Brew Group, Invensys Pump, Membrane Regulator, Dispensing Valve, Oval Head Tool to Remove Oval Head Screws and many more. We repair all Jura espresso machines. When replacement parts are no longer available from the manufacturer, we offer upgrade to a better and reliable super automatic coffee maker.
Illustrated DIY Repair Guides and Instructions
- Brew Group Refurbishing and Rebuild to Fix ERROR 8,
- Removing Coffee Dispensing Faucet Assembly,
- Properly Replacing Grinder Assembly,
DIY Repair Video Tutorials
- Open Jura E8, E9, E50, E55, E70, E75, E80, E85 Espresso Machines,
- Brew Group Rebuild and Refurbish to Fix ERROR 8,
- Leaking or Rusted Membrane Regulator Replacement,
The internal components for E8, E9, E80, E85 are identical. In older E models, the boiler/thermoblock has threaded inlet and outlet. The old thermoblock is not available. The replacement/upgraded thermoblock is available. It comes with reinforced silicone hose compared to the PTFE tube that tends to leak more often. Replacing the thermoblock can be expensive. In such cases, we offer customers an option to upgrade to a better and more reliable super automatic coffee maker such as Saeco Lirika Plus OR Saeco Royal One Touch cappuccino machine.
Frequently Replaced Parts:
Membrane Regulator: Also known as pressure regulator. It controls the flow of water from pump to thermoblock. This part leaks due to calcium build up in the hydraulic system. Calcium build up is caused by lack of descaling. Descaling is the single most important maintenance for all espresso machines. You should descale the machine every 3 or 6 months regularly when prompted. Stop using the expensive and useless Clearyl water filters. Clearyl filter does not remove calcium from water. Using Clearyl filter is like throwing money away down the drain.
Dispensing Valve: Also known as check valve or pressure valve. Location between the thermoblock and the brew group.
F-Shaped Connector: Connects to the thermoblock outlet. Supplies how water to the brew group for coffee or hot water.
Brew Group Repair Kit: Used for rebuilding the brew group to fix Error 8. 80% of the times, brew group is the cause of malfunction in all Jura espresso machines.
Pump: Invensys CP3A pump is used with a klixon. The klixon functions as a protection to prevent the pump from over heating when in use for a long time.
Brew Group: The brew group is a commonly replaced item. The error 8 in Jura machines is related to the brew group malfunction. The video to replace the brew group is posted on our YouTube channel.
JURA Capresso Repair and Service
At Services Unlimited Inc./Parts Guru, we specialize in servicing and repairing the JURA Impressa super automatic espresso and coffee machines. The repair turn around is within 2-3 weeks as we carry almost all parts in stock. In the event, it takes longer than 2 weeks to repair, we offer a loaner machine with similar features, as long as owner pays for the inbound and outbound shipping.
Depending on the JURA model, we charge a flat labor rate ranging from $250 to $400 for repairing the JURA Impressa coffee machines. Spare parts needed to fix the machine, and return shipping will be added to the flat labor rate.
The flat labor rate includes the following services:
- Brew group tear down, cleaning, and sanitizing,
- Replace the brew group gaskets and lubricating the o-rings,
- Properly de-calcifying the machine
- Clean out the coffee grinding chamber
JURA Impressa Repair/Clean Up/Tune Up Services
Each JURA espresso machine is thoroughly inspected for all malfunctions and leakages. The seals and o-rings are replaced where necessary. The brew group is refurbished and lubricated. Multiple cycles of descaling process is completed to ensure that machine’s hydraulic system is cleared of calcium sediments, to the best of our ability.
Repair Turnaround Time and Estimation Fee:
Machines are serviced in the order that they are received. Please allow 2-3 weeks to repair your machine from the time of receipt. You will be called with a repair estimate for approval. If the repairs are delayed due to the part that is out of stock, we will call you to keep you apprised of the reason for delay. In the case your machine needs an expensive part such as electronic power board or CPU, we will call you with the prohibitive cost of the part and request your approval for additional cost to proceed with the repair. Should you decide not to replace the expensive part, we can offer you the Trade-In option for one of the better Brands/Model of fully automatic machines that we sell and recommend.
We sell reliable and best in class fully automatic espresso machine that are exclusively imported from Italy. CLICK HERE to view the best in class espresso machines that we sell. Should you decide to not proceed with the Trade-In option, you will be billed $95.00 as the cost for diagnosis plus return shipping charge. Please note, we must receive your approval of repair costs in 30 days after its given to you. Machines left for over 30 days, will be considered abandoned.
Repairs Payment Method:
Once your JURA espresso machine is repaired, our customer service team member will call you with the final repair cost for collecting the payment.
The cost of repair can be paid by MasterCard/Visa/Discover (We do not accept American Express). You may also send payment to our PayPal account (firstname.lastname@example.org).
JURA Espresso Machine Packaging Instructions
2. Tape all seams of the bottom of the box: 3 pieces of tape sealing the center; 1 piece of tape across the top of each side seam; 1 piece of tape along the edge of each side seam.
3. Place a layer of packing peanuts on the bottom of the box.
4. Place a layer of bubble wrap over top the packing peanuts at the bottom of the box.
5. Wrap the entire machine with bubble wrap. Removing the drip tray and wrapping it separately may make this part easier.
6. Place machine in the center of the box, making sure it is not contacting any of the box walls.
7. "Make a box, inside the box": Roll up bubble wrap into "pillars." Place these "pillars" upright on all 4 corners of the box. This will help stabilize the machine in the center of the box.
8. Use "filler" (i.e. packing peanuts) to further stabilize the machine in the center of the box. Stuff the packing peanuts down in between the machine and box walls to create a buffer zone.
9. Tape all seams of the bottom of the box: 3 pieces of tape sealing the center; 1 piece of tape across the top of each side seam; 1 piece of tape along the edge of each side seam.
JURA Capresso Repair Form
When shipping your JURA espresso machine for repairs, please download the repair form below. The repair form is in a PDF format that can be electronically filled out. Please fill out the form, print it out, and place it right on top of the machine inside the box so it can be easily spotted by the technician upon opening the box. Please be as descriptive as possible in describing the malfunctions you are experiencing with your JURA espresso maker. Please email the repair form to our email email@example.com in addition to placing it inside the box.
- Brew Group
- Cleaners & Filters
- Coffee Beans
- Coffee Dispensing Spouts
- Drip Tray-Cup Grill-Grounds Box
- Espresso Machines
- Expobar Parts
- Frothers & Milk Hoses
- O-Rings & Gaskets
- Oval Tool-Screws-Clips
- PTFE Tubes & Hoses
- Thermoblock & Sensors
- Water Tank