- Jura Impressa J Line Parts | Brew Group, Tune Up Kits, Oval Head Tool
Jura Impressa J Line Parts
Jura Impressa J5, J6, J9, J9.3, J80, J90, J95 Parts and Repairs
Thermoblock, Water Tank, O-Rings, PTFE Tubes, Hoses, Brew Group, Invensys Pump, Membrane Regulator, Dispensing Valve, Oval Head Tool to Remove Oval Head Screws and many more.
We repair all Jura espresso machines. When replacement parts are no longer available from the manufacturer, we offer upgrade to a better and reliable super automatic coffee maker.
Jura Impressa J Line Parts By Model
All Impressa J Line espresso machines (J5, J6, J9, J9.3, J80, J90, J95) internally use identical parts such as brew group, invensys pump, membrane regulator, multiway valve, thermoblock, transformer, temperature sensors, flow meter, and other parts. Only the display module and exterior colors vary.
Please click on the link below to view complete listing of parts for each Jura J Line espresso machine:
Jura Impressa J5, J6, J9 Parts Diagrams
The model number of each Jura J Line espresso machine is printed on the front coffee dispensing spout. Please click on the link below to view the complete parts listing for each model:
Jura Impressa J5, J6, J9, J9.3 Illustrated DIY Repair Guides and Instructions
- Brew Group Refurbishing and Rebuilding Instructions to Fix ERROR 8,
- Conical Grinder Burrs Replacement to Fix FILL BEANS Error.
Jura Impressa J5, J6, J9, J9.3 DIY Repair Video Tutorials
- Video Tutorial for opening the Jura Impressa J5, J6, J9 espresso machines,
- Jura brew group repair and rebuild instructions/video tutorial,
- Jura grinder burr replacement instructions/video tutorial.
Jura J5, J6, J9, J9.3 Error Codes-Messages
In the case of malfunction with Jura Impressa J5, J6, J9 machine, one of the listed below error message is displayed on the screen. The machine automatically shuts off after 5 seconds of displaying the error.
ERROR 1: Temperature sensor is not working. Replace the temperature sensor.
ERROR 2: Temperature sensor is not working. Replace the temperature sensor.
ERROR 5: Machine won't heat up. Place the machine in a room temperature for a day or so and try again.
ERROR 6: Ceramic valve (aka multiway valve) has malfunctioned. The motor in the ceramic valve is not functioning.
ERROR 8: Brew group has malfunctioned. Replace the brew group piston O-Rings. Replace the brew group if necessary.
Frequently Replaced Jura Impressa J5, J6, J9, J9.3 Parts
Membrane Regulator: Also known as pressure regulator. It controls the flow of water from pump to thermoblock. This part leaks due to calcium build up in the hydraulic system. Calcium build up is caused by lack of descaling. Descaling is the single most important maintenance for all espresso machines. You should descale the machine every 3 or 6 months regularly when prompted. Stop using the expensive and useless Clearyl water filters. Clearyl filter does not remove calcium from water. Using Clearyl filter is like throwing money away down the drain.
Pump: Invensys CP3A pump is used with a klixon. The klixon functions as a protection to prevent the pump from over heating when in use for a long time.
Brew Group: The brew group is a commonly replaced item. The error 8 in Jura machines is related to the brew group malfunction. The video to replace the brew group is posted on our YouTube channel.
Grinder Assembly: Grinder gets easily clogged if oily coffee beans are used. Please use medium roast coffee beans in super automatic espresso machine to extend the life of the grinder. Replace the grinder conical burrs every 3,000 cups of coffee's made to enjoy the freshly ground and deliciously brewed coffee with thick golden crema.
Temperature Sensor: Also known as thermal sensor. It is mounted onto the boiler and secured with a torx screw. It measures the thermoblock temperature. The single sensor is used to measure hot water and steam temperature. Therefore, it malfunctions quickly. Error 1 and Error 2 is displayed in J models when the temperature sensor malfunctions. Replace the thermal sensor to fix the issue.
JURA Impressa J5, J6, J9, J9.3, J90, J95 Repairs and Service
At Services Unlimited Inc./Parts Guru, we specialize in servicing and repairing the JURA Impressa super automatic espresso and coffee machines. The repair turn around is within 2-3 weeks as we carry almost all parts in stock. In the event, it takes longer than 2 weeks to repair, we offer a loaner machine with similar features, as long as owner pays for the inbound and outbound shipping.
Depending on the JURA model, we charge a flat labor rate ranging from $250 to $400 for repairing the JURA Impressa coffee machines. Spare parts needed to fix the machine, and return shipping will be added to the flat labor rate.
The flat labor rate includes the following services:
- Brew group tear down, cleaning, and sanitizing,
- Replace the brew group gaskets and lubricating the o-rings,
- Properly de-calcifying the machine
- Clean out the coffee grinding chamber
JURA Impressa Repair/Clean Up/Tune Up Services
Each JURA espresso machine is thoroughly inspected for all malfunctions and leakages. The seals and o-rings are replaced where necessary. The brew group is refurbished and lubricated. Multiple cycles of descaling process is completed to ensure that machine’s hydraulic system is cleared of calcium sediments, to the best of our ability.
Repair Turnaround Time and Estimation Fee:
Machines are serviced in the order that they are received. Please allow 2-3 weeks to repair your machine from the time of receipt. You will be called with a repair estimate for approval. If the repairs are delayed due to the part that is out of stock, we will call you to keep you apprised of the reason for delay. In the case your machine needs an expensive part such as electronic power board or CPU, we will call you with the prohibitive cost of the part and request your approval for additional cost to proceed with the repair. Should you decide not to replace the expensive part, we can offer you the Trade-In option for one of the better Brands/Model of fully automatic machines that we sell and recommend.
We sell reliable and best in class fully automatic espresso machine that are exclusively imported from Italy. CLICK HERE to view the best in class espresso machines that we sell. Should you decide to not proceed with the Trade-In option, you will be billed $95.00 as the cost for diagnosis plus return shipping charge. Please note, we must receive your approval of repair costs in 30 days after its given to you. Machines left for over 30 days, will be considered abandoned.
Repairs Payment Method:
Once your JURA espresso machine is repaired, our customer service team member will call you with the final repair cost for collecting the payment.
The cost of repair can be paid by MasterCard/Visa/Discover (We do not accept American Express). You may also send payment to our PayPal account (email@example.com).
JURA Espresso Machine Packaging Instructions
2. Tape all seams of the bottom of the box: 3 pieces of tape sealing the center; 1 piece of tape across the top of each side seam; 1 piece of tape along the edge of each side seam.
3. Place a layer of packing peanuts on the bottom of the box.
4. Place a layer of bubble wrap over top the packing peanuts at the bottom of the box.
5. Wrap the entire machine with bubble wrap. Removing the drip tray and wrapping it separately may make this part easier.
6. Place machine in the center of the box, making sure it is not contacting any of the box walls.
7. "Make a box, inside the box": Roll up bubble wrap into "pillars." Place these "pillars" upright on all 4 corners of the box. This will help stabilize the machine in the center of the box.
8. Use "filler" (i.e. packing peanuts) to further stabilize the machine in the center of the box. Stuff the packing peanuts down in between the machine and box walls to create a buffer zone.
9. Tape all seams of the bottom of the box: 3 pieces of tape sealing the center; 1 piece of tape across the top of each side seam; 1 piece of tape along the edge of each side seam.
JURA Capresso Repair Form
When shipping your JURA espresso machine for repairs, please download the repair form below. The repair form is in a PDF format that can be electronically filled out. Please fill out the form, print it out, and place it right on top of the machine inside the box so it can be easily spotted by the technician upon opening the box. Please be as descriptive as possible in describing the malfunctions you are experiencing with your JURA espresso maker. Please email the repair form to our email firstname.lastname@example.org in addition to placing it inside the box.
- Brew Group
- Cleaners & Filters
- Coffee Beans
- Coffee Dispensing Spouts
- Drip Tray-Cup Grill-Grounds Box
- Espresso Machines
- Expobar Parts
- Frothers & Milk Hoses
- O-Rings & Gaskets
- Oval Tool-Screws-Clips
- PTFE Tubes & Hoses
- Thermoblock & Sensors
- Water Tank